Sign in to follow this  
Followers 0
Vongphet.Douangmany

Panelview plus 1000

2 posts in this topic

Dear all,

I want someone help me about how to find IP address HMI of panel view plus 1000 or how to connect if we don't know IP address,

Thanks ,

Share this post


Link to post
Share on other sites

First, what are you trying to accomplish? If you're trying to make a change, it will be FAR easier if you have the project archive (it will be a file with an apa extension). In fact, it may not be possible at all without it.

If it's a new HMI, it will have BOOTP enabled, so you can use a BOOTP server to set the IP address.

If it's an existing system, and if your application developer was kind, they included a "Shutdown" button somewhere on the HMI, possibly on a password-protected screen. If not, some PV+ HMIs will flash a small white square in a lower corner of the display while it's booting up. If you see that square, touch it. Either method will get you to the operating system of the HMI. Once on the OS screen, the IP address and subnet mask will be displayed in the lower left corner. To change it, go to Terminal Settings -> Networks and Communications -> Network Connections -> Network Adapters. The built-in network adapter will be selected in the list box. Touch the "IP Address" button to open the IP address screen. Push the button next to each cell to change that cell (IP Address, Subnet Mask, Gateway).

If you can't get to the shutdown/OS screen, it's a lot harder. Is it connected to a PLC? If so, do you know the IP address of the PLC? You can use Nmap or Zenmap to run a ping scan of the same subnet as the PLC. That should turn up the HMI.

1 person likes this

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0