Posted 11 Apr 2019 Hey there- I need to run a program written for a 5/05 at home for troubleshooting purposes. I have the processor, software, RSLogix, cables and other stuff but all of my SLC chassis are on loan to colleagues so I currently don't have anything to put the CPU in. For this exercise, I do not need anything beyond the CPU (no I/O cards). Is it possible to provide power to the CPU via the back plane connector plug and run the CPU outside of the chassis? I have all kinds of power supplies but I don't know the pin-outs for the plugs and (not surprisingly) could not find any information on line. Thanks in advance for any help you can provide, J Share this post Link to post Share on other sites
Posted 11 Apr 2019 I wouldn't recommend it. If you don't need the IO, then why not try to run it in the RSLogix500 emulator? Share this post Link to post Share on other sites
Posted 12 Apr 2019 This is a really bad idea. That card is designed for the chassis and nowhere else. I could write for the next ten minutes about all the ways this could go wrong, lol. Share this post Link to post Share on other sites