Sign in to follow this  
Followers 0
JackE

NB Designer - Download via USB Drive?

2 posts in this topic

Hi,

 

Is it possible with NB Designer to send a project file to someone and they can plug in using a USB Flash drive + the screen will take that file and update itself?

 

I have done this on previous HMI's but never tried with Omron NB range.

Share this post


Link to post
Share on other sites

Hi,

Yes, is possible download project : using NB system menù.

turn off the HMI. In the behind the panel there are two invisible dipswitch, you have to move ON  both of them(there are the explication writed on panel). turn on the hmi and the system menù is displayed. you can select USB->HMI on the bottom.turn off pull On the dipswitchs . turn on the HMI.

For save program on a USB (from manual V106-e1-17 pg 403)

When the project is too large, it can be directly downloaded to the external memory to operate. During the download(the same for download to HMI), check the [Download to USB1] in [Select Section] option in the [NBDownload] dialog box,
Click the [Download] button and then the project file will be downloaded to the external memory. Note 1 If the project file is copied directly to the external memory without using Download, the project will not be operated. 2 Do not remove the external memory during the operation of the NB. The project may not operate correctly. 3 Use the recommended device for the external memory.

in this link the image of the system menù

 https://www.myomron.com/index.php?article=1547&action=kb

1 person likes this

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0