Posted 25 Feb 2019 These 3 items have worked together for years. I wanted to update an HMI screen with some additional bit lamps, so I uploaded the existing program and saved it. I was unable to decompile and edit the program I uploaded, so I started to modify the program I thought was the most recent. I'm able to get the screens to download to the HMI, but I can not get past an "Always Responsed Error....Delay". I deleted all of the screens and downloaded a blank program to ensure none of my addresses were causing the issue. Still have the same error. Things I know: 1. It worked together for years. 2. In the HMI drop down for PLC type, there is not a CTC 2500 option. 3. When I download the .eob that I uploaded, the screens do not load correctly and do not function. Any help is much appreciated. Share this post Link to post Share on other sites
Posted 1 Mar 2019 Hello Is everything connected over ethernet? when ethernet look for protocol something like Ti CP2572 ( that was the ethernet module that was used while Ti cpu had no ethernet) or camp server protocol. regards Henny Share this post Link to post Share on other sites