Posted 15 Feb 2019 Hi All. Was wondering if anyone has any ladder logic examples for controlling a Keyence CV-X vision system. There does not seem to be any examples listed on Keyence's website. I have the CV-X connected to Logix via Ethernet/IP and it does respond to trigger commands. I am having some issues with changing programs in the CV-X controller via PLC control. Any help would be much appreciated. Thanks Share this post Link to post Share on other sites
Posted 15 Feb 2019 I've done this with the Keyence XG. Presumably, it's the same. If so, you'll have to use Keyence Commands to perform this function. If it is mapped into the Ethernet/IP you'll see Command Code, Command Parameter and Command Strobe. Code = Change Program Function Parameter = Program Number Strobe = Go Share this post Link to post Share on other sites