Posted 4 Jan 2019 Hi Can you explain how to integrate B&R modules into Simatic Manager program and what is the difference between these modules as in the attached photo? Share this post Link to post Share on other sites
Posted 4 Jan 2019 (edited) Hi Face Book. You have configured your Slave as Node 6. Your Modules have different amount of Bytes depending on the slice/ module configured in your real hardware. You should check this then ammend as required. Edited 4 Jan 2019 by collinsd70 Share this post Link to post Share on other sites
Posted 4 Jan 2019 HI The program is already run without any problem as the designer do. I need to know the concept of this. Share this post Link to post Share on other sites
Posted 4 Jan 2019 (edited) What do you mean by concept? The way your Slave Hardware is laid out is all dependant on your field wiring and the requirements of this. Edited 4 Jan 2019 by collinsd70 Share this post Link to post Share on other sites
Posted 4 Jan 2019 Hi X67BC6321.L08 X67DM1321.L08 And other modules I don't find all of these I/O in the PLC modules Share this post Link to post Share on other sites
Posted 4 Jan 2019 Those should correspond to Head Module part number. Are you saying those numbers dont correspond to your actual hardware part numbers? If you cant find them in your catalog, chances are you need a .GSD file update. Share this post Link to post Share on other sites
Posted 4 Jan 2019 (edited) 9 minutes ago, collinsd70 said: Are you saying those numbers dont correspond to your actual hardware part numbers? NO ----- I don't find all of these I/O address in the PLC modules ------ What is the relation between X67BC6321.L08 and the modules in the table? ------ Module: X67DM1321.L08 and reserve 10 byte for digital 16 I/O Module How? Edited 4 Jan 2019 by Face Book Share this post Link to post Share on other sites
Posted 4 Jan 2019 (edited) The reason you have more BYTES than required is because maybe they are reserved for Diagnostic Bits. For this information you will have to test online with a VAT table or consult the documentation. The ET200 slices also have this sometimes. Edited 4 Jan 2019 by collinsd70 1 person likes this Share this post Link to post Share on other sites
Posted 4 Jan 2019 (edited) Hi 1-How the modules connected in the table in the attached photo? 2-What is the difference between them? 3-What is the relation between X67BC6321.L08 and the modules in the table? Edited 4 Jan 2019 by Face Book Share this post Link to post Share on other sites
Posted 4 Jan 2019 (edited) X67BC6321 is your PROFIBUS SLAVE Module- the profibus cable will enter here and terminate; or move on to the next node PROFIBUS node. X67DM1321 is an 2 BYTE I/O Module that is connected directly on the above module- this then passes on to Slot 2 on the X2X Expansion Port. So in brief, the answer to your question is that they are 'local expansion modules' on your BR&R Slave...not profibus. Regards Daniel. Edited 4 Jan 2019 by collinsd70 1 person likes this Share this post Link to post Share on other sites
Posted 4 Jan 2019 Yes But Iam not understand the connection between them Can you draw a diagram explain the connection between the modules? Share this post Link to post Share on other sites
Posted 4 Jan 2019 They will be in a 'daisy chain' like Profibus. The data between these module is passed back to X67BC6321 who in turn passes the IO Status to and from the Profibus. Share this post Link to post Share on other sites
Posted 4 Jan 2019 Can you draw a diagram explain the connection between the modules? Share this post Link to post Share on other sites
Posted 4 Jan 2019 (edited) See attached. Regards Daniel. Edited 4 Jan 2019 by collinsd70 1 person likes this Share this post Link to post Share on other sites
Posted 4 Jan 2019 (edited) Hi What are the physical I/O addresses that used in these modules? "these modules contain large byte of I/O addresses" Edited 4 Jan 2019 by Face Book Share this post Link to post Share on other sites
Posted 5 Jan 2019 Check your symbol table..... Regards Daniel Share this post Link to post Share on other sites
Posted 5 Jan 2019 (edited) I need to know how to address I/O for these modules in general? "these modules contain large byte of I/O addresses" Edited 5 Jan 2019 by Face Book Share this post Link to post Share on other sites
Posted 5 Jan 2019 (edited) You have 2 options. 1. Cross Reference your IO in the LAD/FBD Editor and your Symbol Table. 2. Read the associated manual here https://www.br-automation.com/en-gb/products/io-systems/x67-system/bus-controller-modules/x67bc6321/ Regards Daniel Edited 5 Jan 2019 by collinsd70 1 person likes this Share this post Link to post Share on other sites
Posted 5 Jan 2019 (edited) Hi If we have X67DM1321.L08 I/O as in attached photoin HW Configuration: I Address:86.......91 Q Address:86....89 What are the addresses for these channels in this case? Edited 5 Jan 2019 by Face Book Share this post Link to post Share on other sites
Posted 5 Jan 2019 (edited) Your first 2 BYTES here will contain real IO Statuses. The last 2 BYTEs is of type Unsigned Integer which contains the serial number for each module. Regards Daniel. Edited 5 Jan 2019 by collinsd70 1 person likes this Share this post Link to post Share on other sites
Posted 5 Jan 2019 Hi Please Check the addresses in the attached photo. Am I right? Share this post Link to post Share on other sites
Posted 5 Jan 2019 Hi Face Book. You will have to consult the manual and individual modules in more detail for this. If you have eletrical schematics this will be easy to cross reference with the SIMATIC Manager. Regards Daniel. 1 person likes this Share this post Link to post Share on other sites
Posted 5 Jan 2019 Your welcome. Good luck. Regards Daniel. Share this post Link to post Share on other sites