Posted 12 Dec 2018 Hi guys, my panel-view plus 600 HMI, when powered the comm green light comes ON and it does not go OFF, the screen does not come ON, Please how do i solve this issue ? PANELVIEW 600 touchscreen.pdf Share this post Link to post Share on other sites
Posted 12 Dec 2018 Hi Nyame. With the information you've provided- its very hard to give any advice. If you've got it powered up and nothing happens, chances are it will need to be sent for repair. Share this post Link to post Share on other sites
Posted 12 Dec 2018 thanks for the reply, am a technician, follwng the troubleshooting manual, when a red light comes ON on the HMI it indicate hardware failure, but when a green light comes on it indicate software issues, now the issues here is the green light is ON but the system does not power ON for you to access the system and upgrade what ever firewall that maybe required Share this post Link to post Share on other sites
Posted 12 Dec 2018 Okay- can you access via RSLinx? Perhaps the firmware has become corrupted, can you download via ControlFLASH? Share this post Link to post Share on other sites
Posted 13 Dec 2018 Hi, thanks for the reply, please can you guide me on how to access it via RSLinx ? because i have tried to follow some video tutorials, the main communication mode i see there is factory talk studio. thanks Share this post Link to post Share on other sites
Posted 13 Dec 2018 (edited) just seen there is an option to update fw via controlflash 2715p/2713/2715 whats the part number of the screen? Edited 13 Dec 2018 by matt_C_25 Share this post Link to post Share on other sites
Posted 13 Dec 2018 this is what you need to have to try and update the firmware Share this post Link to post Share on other sites
Posted 13 Dec 2018 (edited) if you are connected correctly to the PV it will appear on this screen Edited 13 Dec 2018 by matt_C_25 Share this post Link to post Share on other sites
Posted 13 Dec 2018 (edited) Hi, thanks for the reply but this looks like RSlinx Classic ? please I wish to know, can a corrupt firewall prevent the HMI from powering up ? Edited 13 Dec 2018 by Nyame Ephraim Share this post Link to post Share on other sites
Posted 13 Dec 2018 Please, how do I need to communicate the HMI to RSLinx its via USB, enthernet or serial port, I mean for communication cable to PC Share this post Link to post Share on other sites
Posted 23 Apr 2019 It is possible that the lcd display is broken, maybe you need to buy a new panel-view plus 600 HMI touchscreen to replace it. Share this post Link to post Share on other sites
Posted 23 Apr 2019 (edited) More than likely you will use Ethernet for PC Communication. you will need to know the IP address of the panelview and set your PC IP address and subnet to match before you will be able to see the PV+ in Rslinx Cancel Edited 23 Apr 2019 by Twigums Share this post Link to post Share on other sites