Nyame Ephraim

panel-view plus 600 HMI

12 posts in this topic

Hi Nyame.

With the information you've provided- its very hard to give any advice. 

If you've got it powered up and nothing happens, chances are it will need to be sent for repair.

Share this post


Link to post
Share on other sites

thanks for the reply, am a technician, follwng the troubleshooting manual, when a red light comes ON on the HMI it indicate hardware failure, but when a green light comes on it indicate software issues, now the issues here is the green light is ON but the system does not power ON for you to access the system and upgrade what ever firewall that maybe required 

Share this post


Link to post
Share on other sites

Okay- can you access via RSLinx?

Perhaps the firmware has become corrupted, can you download via ControlFLASH? 

Share this post


Link to post
Share on other sites

Hi, thanks for the reply, please can you guide me on how to access it via RSLinx ? because i have tried to follow some video tutorials, the main communication mode i see there is factory talk studio. 

thanks  

Share this post


Link to post
Share on other sites

just seen there is an option to update fw via controlflash 2715p/2713/2715 whats the part number of the screen?

Edited by matt_C_25

Share this post


Link to post
Share on other sites

this is what you need to have to try and update the firmware

Capture.PNG

Share this post


Link to post
Share on other sites

if you are connected correctly to the PV it will appear on this screen

Capture.PNG.d4371eb085fba3463541d49e4e8c

 

Capture.PNG

Edited by matt_C_25

Share this post


Link to post
Share on other sites

Hi, thanks for the reply but this looks like RSlinx Classic ?

please I wish to know, can a corrupt firewall prevent the HMI from powering up ?

Edited by Nyame Ephraim

Share this post


Link to post
Share on other sites

Please, how do I need to communicate the HMI to RSLinx its via USB, enthernet or serial port, I mean for communication cable to PC

Share this post


Link to post
Share on other sites

Posted (edited)

More than likely you will use Ethernet for PC Communication.  you will need to know the IP address of the panelview and set your PC IP address and subnet to match before you will be able to see the PV+ in Rslinx

 

Edited by Twigums

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now