Sign in to follow this  
Followers 0
SpicyChili

Yokogawa Fast Tools SCADA Modicon 140CPU53414A data communication problem Modbus TCP

1 post in this topic

Dear Fellow Forumers,

I am having a common problem with sending/writing data to all Modicon 140CPU53414A PLCs from our Yokogawa Fast Tools SCADA. For Example, when I write a Value(at first, value was "FALSE) "TRUE" to a modbus register, after few seconds it went back to "FALSE" and after a few seconds again, went back to "TRUE"(at this time, this "TRUE" value sent to PLC) We are using here also Ethernet Module 140NOE77101 which we used also to all PLC with Modicon 140CPU67160 but no issues like this occured. Is there any adjustments that should be made for the PLC? in Yokogawa Fast Tools SCADA, We tried to increase the value for SIGNAL_GAP(a file is attached for description) from 20 to 200(nearly maximum which is 240bytes) and writing/sending data is now ok but not all the time, so sometimes it is still having issues like that.

IMG_20181129_085238.thumb.jpg.a80dbfeb92

Thanks!

IMG_20181129_085238.jpg

Edited by SpicyChili

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0