Posted 25 Oct 2018 (edited) hello everybody, can anybody help me? I have PLC= Q03UDVCPU, HMI= HAKKO-FUJI electric V9100iC, Modbus sielco= SS3018 and thermocouple Type K. I want to making trend in HMI cotinuously with TC type K and modbus SS3018. I attact what connecting I have to do.. but I dont understand what should I insert address in configuration trend on HMI. I've checked address with modbus poll (SS3018 with uport rs485 to TC type K), and I get address number 14 which stored the data result of temperature.. what should I setting for connected the TC to HMI? Edited 25 Oct 2018 by diraemon Share this post Link to post Share on other sites
Posted 25 Oct 2018 https://americas.fujielectric.com/files/V9_Reference1_E.PDF Real Time Trends must read from consecutive channels in the PLC. Historical trends must be logged on a server or local storage and then viewed. Please see the manual above under Trends. This may help you out. Regards, Garry Share this post Link to post Share on other sites
Posted 29 Oct 2018 On 10/25/2018 at 9:12 PM, gclshortt said: https://americas.fujielectric.com/files/V9_Reference1_E.PDF Real Time Trends must read from consecutive channels in the PLC. Historical trends must be logged on a server or local storage and then viewed. Please see the manual above under Trends. This may help you out. Regards, Garry thankyou mr garry.. Share this post Link to post Share on other sites