Cant make runtime application with FTVstudio 7.00

[uharza 0]

I try to make the runtime application for my Panel view plus 7

when i test the application it works and integrated with the PLC I/O

but when i create the runtime application, it comes with messages 

messages : 

*** Start RSLinx Enterprise Conversion Messages ***

ERROR: Unsupported driver detected. 
Driver name = "ControlLogix 55xx Emulator". 
Description: Only the Ethernet, Serial DF1 and Serial DH485 drivers are supported by Compact Machine Edition applications. 

*** End RSLinx Enterprise Conversion Messages ***

Validation completed with errors. The runtime application has NOT been created.
 

*I also attach the pict of Communication setup and the pict of project window size

[pcmccartney1 141]

When you configure the shortcut and point it to the physical device (PLC), you must then press apply.  But this is only for the design portion.

If you also want this to be the runtime configuration, you must then "Copy from Design to Runtime".

Pretty sure, if you look at the the shortcut settings for both the Design and Runtime, you will find that they are pointed a different devices and or drivers. 

[Ken Roach 194]

Welcome to the MrPLC forum !

When FactoryTalk View Studio creates a Runtime, it gathers up all the drivers configured on the Runtime(Target) tab of the RSLinx Enterprise communications setup window so they can be run in the PV+ terminal itself.   

I think that when you shrink the driver browse, or click on the Runtime(Target) tab, you will see a ControlLogix Emulator driver configured.   You just have to delete it from the Runtime(Target) tab.

The "Compact" PanelView Plus terminals only support one driver and one PLC.    The software could in theory delete all the drivers that are not part of the path to the one Shortcut, but instead of doing so it gives you an error message asking you to do it.

[uharza 0]

thanks to pcmccartney1 i have click "copy from design to runtime" but it still come with the same result

[uharza 0]

Ken Roach

How to delete it in RS linx enterprise ?

I've try to delete so many times but it comes again

Give me the step to delete it pls Mr Ken Roach

[uharza 0]

Hey Guys its solved !!

i did just like Mr Ken Roach said