Panel view plus 1000

[Vongphet.Douangmany 1]

How to upload for backup file of Panel view 1000 ?

[Ken Roach 194]

Welcome to the MrPLC Forum !

What is the exact part number of the PanelView 1000 terminal ?     Is it a 2711 PanelView Standard (black bezel) or a 2711P PanelView Plus (gray bezel) ?

In general you need the programming software and a network or serial cable, or a flash memory card and access to the configuration menus.

All of the Allen-Bradley user manuals are available online at literature.rockwellautomation.com

 

[Joe E. 259]

Your subject line says it's as PV+, so you will need to use the "ME Transfer Utility" that comes with FactoryTalk View Studio for ME. Go to the Upload tab and select the source terminal in the RSLinx Enterprise window at the bottom. If your terminal isn't there, you need to open FactoryTalk View Studio, select the "Communications" tab at the bottom of the project explorer, and add the terminal to the configuration (right-click on the Ethernet driver and "Add Device").

 

If you have a CF card and access to the configuration menu of the PV+, that process may be simpler for you.