keal

NX_SerialSend

5 posts in this topic

Hi,

I need some help please, to print with a printer, i need to use NX_serialSend function block. So, i don't have this FB in my library, but i have SysmacStudio 1.15.

I try to find it on the web but, nothing, anyone know how to have it ? 

Thank's in advance.

Share this post


Link to post
Share on other sites

Use the Omron Automation Software AutoUpdate tool to update your software to the newest version.

You will find the tool in the Omron / Sysmac Studio Program group in the Start menu.

Hope this will help.

Share this post


Link to post
Share on other sites

Posted (edited)

Before you update anything, try checking the firmware version of your NJ / NX CPU.

Some function blocks only work for firmware version 1.10 or above, so even though you have Sysmac 1.15, it won't be shown since the CPU firmware version does not support it.

You can try upgrading the firmware of the CPU, although "legally", only Omron engineer can do that for you...

EDIT : As mentioned before, you need CPU Firmware v1.11 or higher to use this instruction. This image taken from the Software User Manual

Capture.thumb.JPG.8db628a8e89ed7fa5e61e5

Edited by innoaloe

Share this post


Link to post
Share on other sites

Ok thanks; and just for information, with a NJ301-1200 connected to a NX ECC202 and a CIF210, i can send data with RS232 to a printer to print ? thanks !

Share this post


Link to post
Share on other sites
1 hour ago, keal said:

Ok thanks; and just for information, with a NJ301-1200 connected to a NX ECC202 and a CIF210, i can send data with RS232 to a printer to print ? thanks !

Yes, but the same requirement about minimum CPU firmware version applies.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now