Posted 8 Jun 2018 (edited) I am new with GS2107 WTBD, please anyone tell how to set the following initial things: Base screen overlap window1 overlap window2 superimpose window1 superimpose window2 Dialog Window Just want to make any new program for HMI, but not able to proceed without above settings. Edited 9 Jun 2018 by prabhjot singh Share this post Link to post Share on other sites
Posted 11 Jun 2018 (edited) You do not need to set the windows screens if you do not use them. You can set a GD100 (internal GOT register) for instance for base screen. Maybe you should start with the online training for HMI http://www.mitsubishielectric.com/fa/assist/e-learning/index.html Edited 11 Jun 2018 by Gambit Share this post Link to post Share on other sites
Posted 13 Jun 2018 Tried writing GD100 in base screen. But error popup "THE DEVICE IS INVALID". Thanks for revert. I Will try training module from the above link Share this post Link to post Share on other sites
Posted 20 Jun 2018 Seems the GS series doesn;t support the internal Devices. Just use a unused word device of the controller connected Share this post Link to post Share on other sites