thomas1000

Q00J and GOT GS2107-WTBD Ethernet Communication Error

4 posts in this topic

Good evening fellow members,

I have an application that uses a Q00J PLC and a GOT GS2107-WTBD HMI which has been successfully set up for Ethernet Communication. Ethernet Communication on the PLC is via an E71 Module. I normally use the Beijers HMI's but thought about giving the GOT's a go.

In order to download the Operating System and Application Software to the HMI I used an USB Lead for communication. In order to further upload, download or verify the HMI Software I would like to do so over Ethernet. I have tried to toggle between USB and Ethernet but keep on getting an error for Ethernet.

In Communication Configuration Settings I have Selected:

 

Connection to GOT: Direct

Connection Image PC Side I/F: Ethernet

Detailed Setting PC Side I/F: No parameter to select

GOT IP Address 192.168.0.20

Peripheral S/W Communication Port 5015.

 

The PC IP Address is 192.168.0.100 and the PLC IP Address is at 192.168.0.1

 

Any Ideas? I would appreciate some help.

Many Thanks.

 

 

 

Share this post


Link to post
Share on other sites

Good choice you can do a lot more with GOT's.

First Can you ping the GOT's ip adress?

In your project go to the GOT ethernet settings => Got ethernet common setting and check if the commport is still set to 5015.

last resort turn of the firewall of you PC. maybe this port is being blocked

 

Share this post


Link to post
Share on other sites

Many Thanks for your reply. Ping is ok. I have comms between plc and hmi but I can't download  from pc to HMI on Ethernet. Any ideas

Share this post


Link to post
Share on other sites

have you checked the port number ?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now