Posted 23 May 2018 I have a program that I as building in SoMachine V4.3 and Vijeo Designer 6.2. Everything is coming together well at this point but I can't seem to figure out if I can put a poteniometer type object on the HMI using Vijeo Designer. This will be used to control the speeds of some VFD that are connected to the PLC. I have found ways to use a meter or simple numeric input it change the WORD that controls the drive speed. I would really like to use a knob or slider bar as I believe it would be a nice function. I've tried it on two different Magelis screens that I will be using for two different projects. One is a HMISCU8A5(controller and HMI in one unit) and the other is a HMIGTO3510. Thank You Share this post Link to post Share on other sites
Posted 23 May 2018 According to hwat i know this is not possible. The closest thing you will get to a slider is using a horizontal,vertical or circular selector switch with certain amount of steps in it that will increment or decrement the value on touch Share this post Link to post Share on other sites