Recipe Save issue again

[Artz 0]

I need to save the new generated recipes from my program into my SDCard plugged either in the HMI or in the NJ Controller (it doesn't matter where).

Whenever I use SaveAllRecipes() function, in my simulations the path is choosen automatically, so the generated .csv is saved on my hardisk at "C:/OMRON/Data/Temp".

However, once i'm working my program just with my NJ controller and HMI (without a Computer on it's network), theres no .csv generation at all despite of my SDCard being plugged either in the HMI or in the NJ Controller.

There's no such function for specify a path for saving recipes as far as I know, right?. So I cannot import anything from nowhere, that's my problem when I try to use ImportRecipe().

Is this case, what I'm doing wrong or what is necessary to set up previously in order to store the generated .csv into de SDCard?

Ty in advance

[Crossbow 295]

The recipe functions are in the HMI, and that's where the card needs to be.  The HMI can't access the card in the PLC.