How to protect screen with password GOT 1055QSBD

[prabhjot singh 0]

Could you please tell me.

1. HMI GOT 1055 QSBD installed. I took backup using DATA TRANSFER software. Now i try to open in GT designer 3 GOT 1000. Error comes (see attached image). i choose YES to open. How can i upgrade GT designer? share link to download latest version of GT designer 3 GOT 1000

if i touch Speed set button, nothing happen. Then i press login button, enter password 12345678. then again touched speed setting. then screen no 4 named conv speed open. now i can change the speed. then press logout then it comes to screen 9 menu page.

 

2.  COuld you please tell me how to make a screen which needs login and logout to change value in a data register. backup file attached.

Backup taken from HMI is now written to another new standby HMI GOT 1055QSBD.

if i touch Speed set button, nothing happen. Then i press login button, enter password 12345678. then again touched speed setting. then screen no 4 named conv speed open. now i can change the speed. then press logout now nohting happens.

Could you please tell how to make such screens.

backup.GTW

COMM.INI

G1PRJCT.G1d

SETUP.INI

[kraykov 4]

Here's information about this project:

Make: 4.4.2015 г. 12:05:10 ч. (GT Designer3 Ver.1.126G)
Update: 27.4.2015 г. 11:22:18 ч. (GT Designer3 Ver.1.126G)
Read: 20.5.2016 г. 10:51:17 ч. (GT Designer3 Ver.1.136S)
Update: 20.5.2016 г. 10:52:12 ч. (GT Designer3 Ver.1.136S)
Read: 14.4.2017 г. 12:29:05 ч. (GT Designer3 Ver.1.136S)
Update: 17.3.2018 г. 19:16:25 ч. (GT Designer3 Ver.1.106L)

It is possible that part of the functions in the project that GT Designee 1.06L not supported  have been deleted.  Update your GT Designer3 ver.1.106L to GT Designer3 Ver.1.136S and then upload the project.

Edited 18 Mar 2018 by kraykov

[prabhjot singh 0]

Thanx for revert. From where can i get the version 1.136S

[Crossbow 295]

You need to contact Mitsubishi for a software update.

[prabhjot singh 0]

ok. Got it.