Communicate from M580 to Allan Bradley Powerflex 753

[PLCRune 2]

Have anyone tried to communicate from Schneider M340 til Allan Bradley Powerflex 753 over Ethernet/IP With help of EDS file provided from Rockwell?

The read is going ok. But it seems like I can not Write to converter.

[Quant 21]

Hello PLCRune,

 

all communication parameters are saved in EDS file. If communication doesn't work then you need to contact the EDS supplier.

[Quant 21]

In worst case you can also take the generic Ethernet/IP EDS, which Schneider Electric  provides for MO580/NOC modules.