Posted 12 Dec 2017 (edited) halo, i'm newbie in HMI and PLC. i have a problem connect HMI omron NB7W-TW00B TO PLC OMRON CP1E. i done setting same baudrate,data bit,parity check, and stop bit in HMI and PLC and i use nb designer for create a HMI display. and this is attachment: a cx programmer, bit switch and bit lamp in nb designer. and the output in hmi is [2]PLC No Response:00-00-1 can you help me? thanks Edited 13 Dec 2017 by riandanualdy Share this post Link to post Share on other sites
Posted 12 Dec 2017 https://www.myomron.com/index.php?action=kb&article=1536 The above thread will walk you though connecting your HMI to the PLC. 1. Connecting Method2. Wiring diagram3. HMI Attribute settings4. PLC Attribute and PLC settings5. Example program Make sure that the units are communicating by the indication light on the PLC. Hope this helps you out. Regards, Garry Share this post Link to post Share on other sites
Posted 13 Dec 2017 7 hours ago, gclshortt said: https://www.myomron.com/index.php?action=kb&article=1536 The above thread will walk you though connecting your HMI to the PLC. 1. Connecting Method2. Wiring diagram3. HMI Attribute settings4. PLC Attribute and PLC settings5. Example program Make sure that the units are communicating by the indication light on the PLC. Hope this helps you out. Regards, Garry 7 hours ago, gclshortt said: its working thank you garry. Have a nice day Share this post Link to post Share on other sites
Posted 10 Jun 2019 2] PLC No Response:00-00-1 pop up display in plc please solve this problem sir... Share this post Link to post Share on other sites
Posted 27 Aug 2022 On 12/13/2017 at 5:42 AM, riandanualdy said: how did you solve it ? Share this post Link to post Share on other sites