E1041 - Fill Overflow error message

[Iandb 0]

Edit:  All, my customer has got programme loaded, however now getting the a System Error as follows

Fill Overflow at 229.97

 

Thanks

 

 

Hi All

I have a customer with a screen issue.  I've sent them the .dat file to load but the screen is not taking it.

It acknowledges that a USB stick is plugged in but then just reverts back to the main screen.  The file loads perfectly when done in our test / setup screen so am at a loss as not had this before.

Thanks

Ian

Edited 6 Dec 2017 by Iandb
Change of topic

[Ron_S 61]

Just a guess because I don't have a screen here or the manual but there are some dip switches under a cover at the back

I think you have to set those to allow transfer from a usb stick

[Iandb 0]

39 minutes ago, Ron_S said:

Just a guess because I don't have a screen here or the manual but there are some dip switches under a cover at the back

I think you have to set those to allow transfer from a usb stick

Ok thanks.  will have them have a look.

 

 

[Iandb 0]

think I've got to the bottom of this.

Customer has possibly installed a programme for the bigger E1071 screen and the graphics / layout is different so the screen is giving this message.