ivan da silva

Network Configuration for the application,

5 posts in this topic

Good Morning. I'm budgeting an application with the following FR-F720, FR-D720, GS2107 wtbd, FX5U-32MT / ESS equipment, I would like to know what network configuration for the application, I need accessory boards for the inverters, what physical arrangement it would be better for this application, which network would be used in the application, besides which function do I need to read and write in the inverters? Can I do CC link? If possible indicate materials that I can use to configure this application.

Share this post


Link to post
Share on other sites

 

 

 

Share this post


Link to post
Share on other sites

The above video should explain it

You already have an FX5U so you have a RS485 via which you can control the FR-D drives.
So you do not need CC-Link.

The FX5 has special commands for driving the inverter

Edited by Gambit

Share this post


Link to post
Share on other sites
Are the specific functions IVCR, IVDR, IVRD, IVWR, IVBWR, IVMC? And the network cabling, will be through 485 with 2 wires or 4? How do I interconnect with the 3 inverter I need adptation?

Share this post


Link to post
Share on other sites

yes those are the ones i mean.

As for the wiring. Please open your e-manual viewer.
Melsec iQ-F => Data Link communication => serial => FX5U
This should open the Melsec iQ-F FX5 user manual (Serial Communication)

Chapter 5 explains inverter communication
Chapter 5.5 wiring of an FR-F and an FR-D

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now