JDR15

Kinetix 300 Faults to PLC

5 posts in this topic

Is it possible to get the specific faults from the Kinetix 300 to the PLC (Compact Logix)?

Share this post


Link to post
Share on other sites

Yes, if they are both on the same network.  All the alarms are in the AOP for the Kinetix 300.

Share this post


Link to post
Share on other sites

Really?  The person who asked me to post this question said he could not find anything like that, he definitely has the AOP loaded too.  Interesting, do you happen to know what tags?

Share this post


Link to post
Share on other sites

Well...I added a 300 to the IO tree of a project.  Then looked at the tag database and found Axis:I.Fault which is a DINT and a summation of all the boolean fault below it.  Worst case scenario the manual describes these for you.

Share this post


Link to post
Share on other sites

You can run DMAT and select the K300. It will give you an HMI FP with all the faults in it and a controller. It can be confusing to use the controller if you aren’t familiar with it. (Drives and Motors Accelerator Toolkit it’s free from Rockwell) 

Also I think there is a sample code that has the same thing and a technote. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now