QJ71C24N Module connect with Q00J cpu to handle printer

[VAIBHAV PATIL 0]

QJ71C24N Module connect with Q00J cpu to handle printer on RS 232.

I wants to print data on RS232 by using Q00J cpu & QJ71C24N serial card.

Which setting & command will need to do this ?

[kaare_t 155]

Which PLC software are you using? You'll need the protocol spec for the printer, then write the protocol in the PLC software and send/receive data on the RS232 ports of the C24 card. You should check out the manual for the C24 card which explains in detail the instructions and buffer memories needed to communicate with peripheral devices.