Ashes

HMI not recognized via PC

8 posts in this topic

I am trying to connect HMI( GS Series) to Laptop but every time it says " Device not recognized ".  Tried changing the port, Laptop, whole HMI. 

It was working for 2-3 times after installation of new software( both Windows and GX Designer). Tries uninstalling and installing GX designer.

Pls help.

Share this post


Link to post
Share on other sites

@Ashes a basic question for you: Have you installed the GS Installer.exe?

GS.png.c2eeade83267a4832267ae5812a453cb.

Share this post


Link to post
Share on other sites

@Akahige  

Course..... Every software which came with GX Works3 (Ez socket, data transfer, etc)

Share this post


Link to post
Share on other sites
18 hours ago, Ashes said:

Course..... Every software which came with GX Works3 (Ez socket, data transfer, etc)

You're referring to GX Works3. Which software have you installed? Do you have the GT Works3 software, and if so which version?

Share this post


Link to post
Share on other sites

Yes..GT Works 3...Version 1.160S

I think the cable is faulty..gonna change.

Btw if that could be the problem which pin of the USB2.0 to USB Mini-B is faulty?

Share this post


Link to post
Share on other sites
15 hours ago, Ashes said:

Btw if that could be the problem which pin of the USB2.0 to USB Mini-B is faulty?

No idea! You can do some trivial tests (not exactly bullet-proof, but a simple test) by measuring throughput of the pins between USB2.0 <-> Mini-B by using a multimeter or similar.

Share this post


Link to post
Share on other sites

Anyway ...thanks...

Cable was indeed faulty...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now