Posted 6 Sep 2017 I am trying to connect HMI( GS Series) to Laptop but every time it says " Device not recognized ". Tried changing the port, Laptop, whole HMI. It was working for 2-3 times after installation of new software( both Windows and GX Designer). Tries uninstalling and installing GX designer. Pls help. Share this post Link to post Share on other sites
Posted 6 Sep 2017 @Ashes a basic question for you: Have you installed the GS Installer.exe? Share this post Link to post Share on other sites
Posted 7 Sep 2017 @Akahige Course..... Every software which came with GX Works3 (Ez socket, data transfer, etc) Share this post Link to post Share on other sites
Posted 8 Sep 2017 18 hours ago, Ashes said: Course..... Every software which came with GX Works3 (Ez socket, data transfer, etc) You're referring to GX Works3. Which software have you installed? Do you have the GT Works3 software, and if so which version? Share this post Link to post Share on other sites
Posted 8 Sep 2017 Yes..GT Works 3...Version 1.160S I think the cable is faulty..gonna change. Btw if that could be the problem which pin of the USB2.0 to USB Mini-B is faulty? Share this post Link to post Share on other sites
Posted 9 Sep 2017 15 hours ago, Ashes said: Btw if that could be the problem which pin of the USB2.0 to USB Mini-B is faulty? No idea! You can do some trivial tests (not exactly bullet-proof, but a simple test) by measuring throughput of the pins between USB2.0 <-> Mini-B by using a multimeter or similar. Share this post Link to post Share on other sites
Posted 10 Sep 2017 Anyway ...thanks... Cable was indeed faulty... Share this post Link to post Share on other sites