Omron PLC Cj1M CPU11 ETN 21 IP fixing Problem.

[Maqsood 0]

Dear all Please identify me i am having one Issue in my PLC.When I changed the IP of my plc then suddenly its showing error ERH its mean IP address wrong but  My CPU setting is same like previous means unit no=0, x16^0=0 ,Node=x16^0=1  and IP is 192.168.0.15 Mask add.255.255.255.0. but when I, transfer to PLC (in Program Mode) its not transferred(Failed to Transfer) please rectify me where I am doing wrong.

[IO_Rack 178]

The Node No. needs to be set to the last octet of your IP address. It is in Base 16 (Hex).

(x16^1)=0 ,(x16^0)=F

 

[Maqsood 0]

Thank you very much for your support. it is really very helpfull.