Command via supervisor supervisor, with CLP m221 Scheneider

[Atanazio 0]

Good Morning!

Forgive me my English, I'm from Brazil, I work in the automation area, but I need your help.

Please, I need to communicate the vijeo citect 7.4 with the CLP m221 via ethernet, I need to collect analog data (level, pressure, etc ...) and send analog data (set work points) to the CLP.

I also need to receive bits from the clp (pump status, defect, etc ...) and I need to send bit's command (connect pump, turn off pump, open valve, etc ...), but I can not, you Can send me a configuration of how to do this, since we have many of these clp installed, and we are not getting it.

I need an urgent answer please

[Phong 0]

What is your CLP?

[cHud 25]

Quote

What is your CLP?

PLC in reverse?

What is the plc part number?

You will have to use a modbus tcp/ip driver. there are many youtube videos showing how to connect a m340 plc to citect. you should be able to do exactly the same and it should work

Edited 16 Aug 2017 by cHud