Posted 11 Jul 2017 Hello, I'm using HMI DOP-B03E211 and its connected to DVP12SE11R PLC . I need help with some function in the DOPSOFT program. 1) I would like to implement a function that after 1 minute of no screen touching it returns back to the main screen. 2) I have listed the alarms in the ALARM SETUP (under Options) and i would like to link every one of them to the input registers (Xi) in the DELTA controller , for instance , i want to link between the alarm : "MAIN AC FAILURE" to X0 in the PLC. how do i do that using ALARM SETUP? 3) One of the customer's requirements is : in the main screen you got three buttons : 'operational' , 'maintanance'' , 'alarm list'. - when i click on operational button and then on the alarm list it should show me only the alarms which relevent to operational mode . when i click on maintanance button it should show me the alarm which relevent to maintanance mode. how do i do that? 4) I would like to enable the option to control that alarm list through the PC - in the PC i got an Excel file that lists the whole alarms in the system . i would like to control those alarm by that Excel file - Enable / Disable the alarm through that file and save that list in the HMI. how do i do that? thanks in advance. Share this post Link to post Share on other sites