Posted 12 Jun 2017 I'm not new to Omron, so I'm pretty embarrassed to say I am losing a battle with connecting an NS5-TQ11 to a CP1H PLC through a CP1W-CIF41 module. At one point I was able to connect and download programs via ethernet to both units, but now I have broken that connection on the NS5. Originally I used the default IP address of the CIF41 (192.168.250.1), but does that require the use of a routing table? I am now exploring how to set the IP using the DM area, but this "FD" thing and n+155 & n+156 has me totally confused. Any help would greatly be appreciated. It is just an HMI to a PLC, so I'm sure I'm missing something fairly simple. PLC IP = 192.168.250.1 HMI IP = 192.168.250.2 PC IP = 192.168.250.5 Share this post Link to post Share on other sites
Posted 13 Jun 2017 Don't be embarrassed, this is a confusing setup. In the link above I have posted a document with step by step instructions from Omron. Share this post Link to post Share on other sites
Posted 13 Jun 2017 I've added this document to the downloads section. Share this post Link to post Share on other sites
Posted 16 May 2022 Click the link above. It still works. Share this post Link to post Share on other sites
