Stuartjl

Connecting a GOT 2508 to Mitsubishi Q12 plc

5 posts in this topic

Hi, i'm having a bit of trouble connecting my GOT 2508 to Q12 plc via ethernet. I have follwed the advice that GOT manuals have given me but i still cannot connect. I belive my GOT setting are correct now, but entirely sure they are correct in my Q12. I'm using GX IEC Develope 7.04.

 

Thanks, Stuart

Share this post


Link to post
Share on other sites

Can you give us your settings for your ethernet settings on the PLC and the HMI.

Share this post


Link to post
Share on other sites

Hi Gambit, thanks for the reply. Please see attached.

 

Thanks, Stuart

PLC_Network_Parameters_Q12.jpg

PLC_Settings_Q12.jpg

Comunication_Settings_GOT.jpg

Controller_Settings_GOT.jpg

Share this post


Link to post
Share on other sites

The connection to the from the HMI to the PLC is UDP not TCP. (take a look at your last screen capture...... 5006 UDP)

You have to set up a melsoft connection but for UDP

 

 

1 person likes this

Share this post


Link to post
Share on other sites
On 19/05/2017 at 1:56 PM, Gambit said:

The connection to the from the HMI to the PLC is UDP not TCP. (take a look at your last screen capture...... 5006 UDP)

You have to set up a melsoft connection but for UDP

 

 

Hi, thanks for the Help. It seems the first issue was the GOT station number. I've got it as 1 in the above setup, it should be 60. Going play around with the melsoft settings for UDP as i have it working on TCP.

 

Stuart

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now