Posted 22 Apr 2017 Hi All I am using a wago PLC 750-881 and setting up an IP address for it like this: - setting up IP address by dip switch to 192.168.1.3 - connecting my Laptop with the PLC via Web-based management system and set its IP address to 10.1.1.10, selecting "Use IP address from EEPROM" - restart PLC - reconnecting my Laptop with the PLC via web-based management system but at this time it cannot be connected. can you show me why and how to fix this problem? Share this post Link to post Share on other sites
Posted 15 Jun 2017 Set the dip switches back to the default. If they are set to an address, the 881 will use it. Also, download the "Wago ethernet settings" utility. It's a better way to set up the PLC. Share this post Link to post Share on other sites