denise01

CJ2M Expansion IC101

6 posts in this topic

Hello,

I have a CJ2M with ten cards attached so need to expand to a second rack.

I have fitted a IC101 and connected the lead as advised but when I come to create a new I/O set up I get the error message. Unable to download special set up. error = binary I/O 00x400 not recognised. Everything appears okay until I try to add the extension. Anyone had a similar problem?

 

Regards

Share this post


Link to post
Share on other sites

You also need an II101 on the expansion rack.

Share this post


Link to post
Share on other sites

You also need a CJ1W-TER01 end cap on the second rack.

Share this post


Link to post
Share on other sites

Sorry forgot to say I have also connected these items.

The lead is definitely connected okay. The previous I/O set up is okay its just when I try to add a ID211 card to Rack 2. Not sure what 0x400 refers to wondered if it was card 4 on Rack 0. I have used the IC101 before but never with a CJ2M. The others were CJ1M.

 

 

Regards

Share this post


Link to post
Share on other sites

Works the same with a CJ2M

Share this post


Link to post
Share on other sites

I think that the IC101 card is defective Bob,

I tried it on a good working expansion set up and the same fault so have ordered another card.

 

Regards

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now