mazen_abs

can i connect VFD E700 & FX3g to GOT2000

16 posts in this topic

Dear Friends ,

Can i connect VFD E700 & FX3g to GOT2000 , because i try to connect FX3GE by Ethernet & E700 by RS485 ,but when i tried to load this configuration to GOT2000 GT21 it always gives  this message

dialog

would you please help me to solve this

Thanks in advance

ssJPG.JPG

Share this post


Link to post
Share on other sites

You're connection should be E700 ethernet FX3GE RS485 E700.

Have you set it up like this? 
If so send the screen captures of you settings for the:

  • the communication settings of the GOT2000
  • the FX3GE ethernet parameters and serial port
  • the communication parameters on the E700

 

 

Share this post


Link to post
Share on other sites

but sorry inverter E700 doesn't support Ethernet

Share this post


Link to post
Share on other sites

What about the settings in the PLC and I also can't see the plc settings. The first and last screen capture are the same.

We need to see what is below

This is an example project for GOT and FR-E

MITSUBISHI_FR-E700_V_Ver2_E.zip

This is an example project for GOT and FX3 ethernet ADP (which is the same as the FX3GE).

MITSUBISHI_FXCPU-Ether_V_Ver2_E.zip

Edited by Gambit

Share this post


Link to post
Share on other sites

fro inverter nothing in bellow 

and for PLC 

3.JPG

Share this post


Link to post
Share on other sites

GOT looks good what about your ethernet settings in GX works2. Have you seen the example projects in my previous post!!!!

Share this post


Link to post
Share on other sites

Okay so you only have problems with the GOT to the FR-E ?

Can you send the parameters which you have changed in the FR-E?

 

Edited by Gambit

Share this post


Link to post
Share on other sites

the problem that  I cant download gt designer to the got2000 when I press write to got it appear this dialog

ssJPG.JPG

Share this post


Link to post
Share on other sites

i mean gtdesigner program that i make it with gt designer3

Share this post


Link to post
Share on other sites

In that case send the project so we can take a look. You can delete alle the screens if you like before sending it

Share this post


Link to post
Share on other sites

What have you selected here when you press the button application selection?

Is the ethernet driver for the FX and the freqrol driver selected?

 

aplication selec Capture.JPG

Share this post


Link to post
Share on other sites

anything else selected ?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now