Posted 16 Feb 2017 (edited) I normally program Siemens S7 so a bit "rusty" with Mitsubishi. What software and interface cables are required to connect to a Q03UDECPU. I have not been to site yet so do not know the exact config or even if there is a back up copy of the program. Thanks Edited 16 Feb 2017 by Moggie Share this post Link to post Share on other sites
Posted 16 Feb 2017 You will need GX Works 2 and you can connect with a standard Ethernet cable or mini usb is also an option. Share this post Link to post Share on other sites
Posted 18 Feb 2017 Thank you plcdp what is the latest / best version - the Mitsi web site is confusing - the link for GX Works 2 takes me to the GX Works 3 info page!! Share this post Link to post Share on other sites
Posted 19 Feb 2017 GX Works3 replaces GX Works2 which replaced GX-Developer. Share this post Link to post Share on other sites
Posted 20 Feb 2017 @Crossbow: Not exactly correct that GX Works3 replaces GX Works2, since you cannot program a Q03 CPU using GX Works3. They are two different software packages for different products. @Moggie: You need GX Works2, the latest version is 1.545T EU. You need to be logged into MyMitsubishi to access the link: https://eu3a.mitsubishielectric.com/fa/en/mymitsubishi/download_manager?id=11583 Share this post Link to post Share on other sites
Posted 20 Feb 2017 Didn't realize that, I was misinformed. Haven't even seen GX3 in person yet, not relevant to any of my current projects. Share this post Link to post Share on other sites