CJ1W-MAD42 wih plc CJ2M

[RAKESH K 0]

HIE ALL, I am using an OMRON PLC for the first time. The analog output module i am using is CJ1W-MAD42. so, i selected its properties as 0-5 V DC. as per the unit no. i enabled its 2000.00. and moved a hex value of #1068. but at the output i measured as 0.51V dc. i changed the value in the mov instruction but its still the same. what else do i need to change or configure. PLEASE HELP. 

[Mendon Systems 22]

CIO 2000 is the control word for the MAD42. It should be set to #3 to enable both outputs. The first output word is CIO 2001.