Posted 24 Dec 2016 Hi All, Can some one help me with prepare my HMI screen AVALUE 1503. On this moment there is only a bios on the screen. How can i put the additional software on the CCM flash card. i have TIA V13 software on my computer and i know how i must work in simulation mode with the HMI. I am searching now for a walk through for install the needed software on my HMI screen. Can not find it on the internet. Thanks in advance. Frans Share this post Link to post Share on other sites
Posted 28 Dec 2016 Hi All, I have already made a little progress. Have prepared a usb stick with windows 7 install software. Also i have bought a 8GB CCM flash card where i will install the ultimate w7 software on When i start-up the HMI started from the USB with the W7 install, but when he asked me where i will install the operating system i can not see my CCM 8G flash card What do i wrong? Thanks in advance. Frans Share this post Link to post Share on other sites