Please help me analog in-output

[monmentomtem 0]

I can't chage output analog in cad DA003 for plc c200he , AVG(19) can't chage output DM2400

https://www.youtube.com/watch?v=y8rHMDiMBrc

[pfort 20]

 

I think it's not available for your CPU.

[Jay Anthony 118]

AVG(195) is part of the C200HE instruction set per the manual. You have changed it to AVG(19).  Please change it back to AVG(195).

It is also an expansion instruction.  Did you load the expansion instruction table?

 

[monmentomtem 0]

2 hours ago, pfort said:

 

I think it's not available for your CPU.

 

29 minutes ago, Jay Anthony said:

AVG(195) is part of the C200HE instruction set per the manual. You have changed it to AVG(19).  Please change it back to AVG(195).

It is also an expansion instruction.  Did you load the expansion instruction table?

 

Yes i thanks i test plc

[Tuan 1]

15 hours ago, Jay Anthony said:

AVG(195) is part of the C200HE instruction set per the manual. You have changed it to AVG(19).  Please change it back to AVG(195).

It is also an expansion instruction.  Did you load the expansion instruction table?

 

I can't change AVG to AVG(195) because not available in expansion instruction 

[monmentomtem 0]

15 hours ago, Jay Anthony said:

AVG(195) is part of the C200HE instruction set per the manual. You have changed it to AVG(19).  Please change it back to AVG(195).

It is also an expansion instruction.  Did you load the expansion instruction table?

 

I can't change AVG to AVG(195) because not available in expansion instruction 

[Jay Anthony 118]

AVG(195) only available in C2000HX.  You are correct.  Leave the AVG to AVG(19). 

Are you using D2440 anywhere else in your program?  It could be overwritten somewhere else.

[monmentomtem 0]

13 hours ago, Jay Anthony said:

AVG(195) only available in C2000HX.  You are correct.  Leave the AVG to AVG(19). 

Are you using D2440 anywhere else in your program?  It could be overwritten somewhere else.

please checking by Teamview ???

[Jay Anthony 118]

Post your program.

[monmentomtem 0]

Just now, Jay Anthony said:

Post your program.

thanks . checking ALL analog input 111 to 118 

boc 120.cxp

[monmentomtem 0]

Help meeeeee Thanks U

[Jay Anthony 118]

I'll look at it tomorrow.  I suspect some other part of the program is overwriting DM2440.

[Jay Anthony 118]

This is not the code that you posted on you tube.

The code you posted uses differentiated contacts to execute the AVG(18).  I do not think that works.

[monmentomtem 0]

1 hour ago, Jay Anthony said:

This is not the code that you posted on you tube.

The code you posted uses differentiated contacts to execute the AVG(18).  I do not think that works.

can you checking by teamview my programe ? ID 534 451 617 pass 6736

Edited 2 Dec 2016 by monmentomtem

[Jay Anthony 118]

No...

[monmentomtem 0]

2 hours ago, Jay Anthony said:

No...

 

[Jay Anthony 118]

Quote

This is not the code that you posted on you tube.

Post the you tube code.

Quote

The code you posted uses differentiated contacts to execute the AVG(18).  I do not think that works.

Have you tried to execute AVG(19) without differentiated contacts??

[monmentomtem 0]

14 hours ago, Jay Anthony said:

Post the you tube code.

Have you tried to execute AVG(19) without differentiated contacts??

Thank U I did it

[pfort 20]

28 minutes ago, monmentomtem said:

Thank U I did it

And...?

[monmentomtem 0]

  Cảm ơn các bạn đã quan tâm tới chủ đề của tôi . Bây giờ mọi việc tôi đã giải quyết được rồi 

Thank you for your interest to my theme. Now everything I've solved then