S7 1500 with Altivar 630 (Schneider VFD)

[l_person 0]

Hi All,

Now i'm working with communicating S7 1500 with Altivar 630. I want to use MC Block in TIA Portal to control this VFD. With Siemens VFD, this is fine but with Altivar, I cant do it.

Can Anyone help me about this?

Thank you!!!

[cHud 25]

What communication protocol are you using?

[l_person 0]

Hi,

Sorry about my bad. I use profibus (PROFIdrive standard telegram 1). I use two options: 

Option 1: I use control word to control VFD, this control is OK.

Option 2: i want to use MC block to control VFD, but I cant.

Please give me advices about option 2.

[markyspicer 3]

Try this one using GSD file. Hope this may help mapping some variables.

GSD File.zip

[l_person 0]

Dear,

which you sent to me used for atv61/71. Do you have gsd (dpv1) file for atv630?

Beside that, one question: do we need to use  gsd dpv file and atv630 gsd file for communication?

Thanks.

[markyspicer 3]

I don't know if this one is available to their site(Schneider). If your drives are in the profibus network. you can just simply configure your network(Step 7) and add the corresponding GSD file of the device.

[markyspicer 3]

Try to check here

http://www.schneider-electric.us/en/product/ATV630D18M3/variable-speed-drive-atv630---18.5kw-25hp---200...240v---ip21-ul-type-1/

 

i don't know the specification of the device, you can just simply search from here. GSD file for profibus are available.