Connect cj1w -cpu13 use cn22 cable

[My.taj 0]

Hello. I'm try to connect use serial port in pc but no any responses. Is cn22 requir drivers? 

 

[Crossbow 295]

What is CN22?

There are numerous posts here if you search to show the proper wiring for the serial cable.

[innoaloe 59]

Guess it should be either USB-CN226 or CS1W-CN226 cable since the PLC is CJ1M-CPU13.

 

If you are using USB-CN226, indeed you'll need the driver which included as a CD-ROM when you buy the cable.
If you are using CS1W-CN226 directly plugged to DB9 serial port in PC, no driver will be required. But if you are using additional Serial-to-USB Converter, of course a driver will be required for that converter

Whichever cable you are using, make sure the DIP Switch for Peripheral Port is set to Off

[My.taj 0]

Thankyou for help I'm use cn22cable with usb. Rs232 converter

I'm found problem about cx.programmer not installed in right way 

 

[innoaloe 59]

Glad you solved the problem