Posted 9 Sep 2016 (edited) I am experiencing a serious problem. Everything went fine in my project for month. Yesterday when I "Transfer to Controller" (like I use to do several time a day) I got this Message : "Build is not complete. Process was aborted". So I build again, I Rebuild controler, I restart SysmacStudio, restart the computer, reset the hardware on the project ... nothing worked. Always the same message. So I opened a previous version of my code. Since it was allready built when saved, I had no problem transfering it in the controler. However, the moment I change a line (have to rebuild) on this backed up version... same problem appear. I finally got to the "output windows" (Alt+3) where I saw ALL build are failed. I've contacted my Omron representative and he is trying to help but he seem as lost as I am. Please help if you can, I am using Sysmac Studio 1.13 on Windows 10. I also have a HMI wired to the project and everything work fine with it. Edited 9 Sep 2016 by TK Share this post Link to post Share on other sites
Posted 9 Sep 2016 Check the Output window to see which section has failed to build. Share this post Link to post Share on other sites
Posted 12 Sep 2016 Hi, First, Sysmac Studio 1.13 is an old version. It does not support installation on Windows 10. And I believe there were known "build issues" with this old version so you should just have to update to the latest version. European registered users can always download the latest disk image from their Software Download Area see-> How Do I Update Sysmac Studio? Rgds BB Share this post Link to post Share on other sites
Posted 15 Sep 2016 Yeah 1.13 was not rated for Windows 10, not until 1.15. Upgrades are free when you register your software. Sounds more like a corruption issue though. Try exporting the project and importing it again. Or export and test on a another PC. Share this post Link to post Share on other sites
