cpm1a to hmi ns8

[bobyharvian 0]

Hi every one, I have plc omron cpm1a and hmi ns8v2. I have problem with communication between plc and hmi. Please help me How to connect plc cpm1a and hmi ns8. I use cx programer V9 and cx designer

Thx before

[Jay Anthony 118]

The picture does not show the adapter module between the peripheral port and the NS8.  Please describe the connection.

[bobyharvian 0]

Hi jay anthony, thx for reply

Iuse cqm01 - cif02 cable from plc to hmi. But still connecting. What had to use the module for communication between plc cpm1a and hmi ns8

 

[Jay Anthony 118]

The CIF01 cable is made for a standard RS232 connection to a computer where SG is Pin5.  SG is Pin9 on the NS8. Also you will need to reverse Pins 2&3.  You will need to make a special adapter cable from CIF01 to NS8.