GE Fanuc 90-70 PLC communication problem

[Ranjit Singh Shekhawat 0]

How to communicate  Machine Edition ( in Remote PC, 150 meters) to GE Fanuc 90-70 PLCs 15-pin programming port over ethernet ?

Any converter for RS-485 to Ethernet ?

[RussB 22]

GE sells one under part number IC200SET001, here is the manual for it. It's been around for a long time and works quite well when properly used.

For only 150 meters you could go with RS-485 too.

https://ge-ip.force.com/communities/en_US/Documentation/VersaMax-Serial-to-Ethernet-Adapter-Users-Manual

Edited 5 May 2016 by RussB