CP1L-EL TCP/IP with VideoJet Printer

[littledaus87 0]

Hello,

My previous topic was want to establish communication CP1E --> Videojeet Printer using RS232 serial cable. this project test SUCCESS. by the way distance from printer and PLC was very far almost 500meter. so printer technical team request to use tcp communication using cat5e cable.

Problem:

1. I'm using TCP communication protocol that need me to have open,send,receive,close port.

2. Communication testing with PC Hyper Terminal --> OK but HT need in waiting call mode, i don't know why.

3. Using printer no result show. how i'm suppose to know communication already establish?

4. Communication setting on PLC Setting-Built in Enthernet need to add other communication device.?

here i'm share some programs to give more understanding.

Thanksm

TCP with printer.cxp

[ivanibiden 0]

Im trying to program this printer,  how you send the ascii code with cx programmer to the inkjet printer ? do you have a sample of the cx- programmer.

 

Best regards

[widadi 0]

hi lettledause

hi littledause87

now i am facing same project like you, i want to connect plc omron cp1l to printer brother with rs232 could you give sample program that you have made ? 

thanks