1768-L43 configuration in Logix5000 ?

[wendaiyu 0]

Hi, guys, how are you? We have one old machine with Siematic S7-200 and OP3. We want to upgrade the machine to AB system, so they give me 1768-L43 and PanelView Plus 700. I have some questions about 1768-L43 configuration in Logix5000: On my electrical cabinet, the physical locations from left to right are: 0: power supply; 1: 1768-EWEB A module; 2: 1768-L43; 3: 16 bits AC output module; 4: 32 bits DC Input module; 5: 1769-ECR analog module. When I configured 1768-L43 in Logix5000, there are 1768 bus and 1769 bus showing up. 1, I added 1768-EWEB A module on 1768 bus, but why its slot number is 1 and the slot number of L43 is 0? I think the EWEB’s should be 0 and L43’s should be 1. 2, I tried to add 1769-ECR analog module on 1769 bus, but I cannot find it on the Category. Why? Could you give a hand to fix these? Thanks a lot.

[PortenoSuenos 1]

The EWEB should be on the left side of the processor as it is part of the 1768 bus as Slot 1. Proc is always slot 0 The 1768 modules are on the left side (1768 bus) starting with slot 1. The 1769 modules are on the right side (1769 bus) also starting with slot 1. 1769-ECR is an End Cap Right (ECL = End Cap Left). I don't believe you have to add the end caps into your IO Config. Edited 7 Sep 2015 by PortenoSuenos