Connect to panelview plus 1000 using FactoryTalk ME

[Stuartjl 0]

Hi All, i have to connect to a Panel View plus 1000. The HMI has an existing project so i can't use bootp to assign an ip address (already assigned). My question is, if the HMI has an existing project on "how can i find and change the address of the HMI?" Stu

[IO_Rack 181]

The first thing to try is to look for a Go To Configuration button in the current project. From the configuration menu, you navigate to Network Adaptors to view the IP address. Second thing to try, and depending upon the version of the Panelview Plus, reboot the Panelview Plus then look for a white square in the bottom left of the screen. Pressing this button will load the configuration menu. The white square will only appear breifly. Edited 14 May 2015 by IO_Rack

[Stuartjl 0]

Thank you, both options worked. The first option worked once i got the Login details to access config, second option worked when pressing F1.

[IO_Rack 181]

You're welcome. Glad I could help.