Posted 6 Apr 2015 Dear All, I have the RTU module made by Schneider (BMX NOR 0200H), this is M340 PLC family, which is will be used for connected to other RTU using IEC101 protocol via RS232 serial port. Any body can give advice to me how to do mapping the modbus register to IEC101 protocol ? Please. I already try step by step based on the NOR0200H MODULE USER MANUAL, but I have not get result. Thks Share this post Link to post Share on other sites
Posted 10 Apr 2015 Alhamdulillah, Solved. 1 person likes this Share this post Link to post Share on other sites
Posted 21 Jul 2016 bonsoir Azdi Mus je travaille sur une communication entre BMX NOR 0200H et modem SR2MOD02, s'il vous plait est ce que vous pouvez m'envoyer votre solution Grand merci d'avance mon email( hicham.9111@gmail.com ) Share this post Link to post Share on other sites
Posted 21 Jul 2016 Quote goodnight Azdi Mus I work on communication between BMX NOR 0200H and SR2MOD02 modem, please is that you can send me your Grand solution thank you in advance my email ( hicham.9111@gmail.com ) 1 person likes this Share this post Link to post Share on other sites
Posted 14 Feb 2017 Hi Jay Anthony, I'm sorry for late reply, coz no notification for me. I have never use GSM modem (SR2MOD02), so I have no suggestion for you. I use NOR0200H only for communication link with another RTU via serial port with IEC-101 protocol. Share this post Link to post Share on other sites
Posted 24 Apr 2017 Hello Mr. Azdi MusI would just to know the configuration you have on your RTU BMX NOR 0200H , if you can send us the configuration file .format xmlThank you in advance for this service. Mail : zeraiditaoufi@hotmail.com ZERAIDI Share this post Link to post Share on other sites
Posted 25 Apr 2017 (edited) Hi Zeraidi, I can not online to the RTU to export the configuration, coz the device already placed at site, and I have no remote access for it. Btw, what kind of configuration as you need ? I have some pictures (screen captured) during online at site. Regards, Azdi Mustafa Edited 25 Apr 2017 by Azdi Mus Share this post Link to post Share on other sites
Posted 25 Apr 2017 Hi Mr. Azdi Mustafa,Firstly Thank you for having replied to my request,I have a BMX NOR 0200 H point-to-point architecture and I would like to transmit the value of a word ( INT ) (% MW100) exist at the slave level to another (INT ) %MW200 address at the master level, how I can do this mapping configuration .For the printed screens that you have if possible to send them to me on this address, zeraiditaoufi@hotmail.com it can be useful for my pmlatefrome. Tankyou a lot Mister MUstaphaRegards,ZERAIDI. Share this post Link to post Share on other sites
Posted 7 Jan 2020 Thank you for the post Mr. Azdi Mustafa. I am trying to do the mapping using the DNP3 protocol. Can you please share the screen shots for reference? My email address is niravbhatt89@gmail.com Thank you very much! Nirav Share this post Link to post Share on other sites