CP1E to panasonic drive

[shithun 0]

Hi, I have CP1E-N30DT1A(Source type) and Panasonic MDD T5540 servo with me. How to interface PLC to servo using pulse controlled method. Since the PLC is source type whether pulse controlled methos will work out or not? Please check the attachment.

[ParaffinPower 13]

Hello I'd connect pins 3 and 5 to the CP1E's pulse output terminals (via 2K2 resistors), and pins 4 and 6 to 0v (same 0v as the plc). Pp

[shithun 0]

In my case, I have to connect two PANASONIC servo drives to one CP1E PLC. SO I have configured this manner. Pin1(servo) ----> q100.0 Pin4(servo) ----> 0V Pin2(servo) -----> q100.1 Pin6(servo) -----> 0V I have tried this config but it's not working. Please guide.