Can I connect F60-m from GX- Developer

[Guest teerapon_m]

Hi , this is my first time. My problem is my boss bought the old machine( water jet pump) from auction. When I test this machine it out of function. so it use F2 - 60m for control but it has 15 pin connector. I have GX - Developer and cable for connect (25 pin for A - Series and 8 pin For FX - Series). How can I connect to it and the program can run in GX - Developer . Thank you very much for your anser

[Guest Albert fanakapan]

In a word - no. Gx dev does not cover the F2 (or F1) Medoc does, but you will need a new lead (well old really) and I have long since forgotten its number. Most of these plc's were programmed with a hand held programmer

[navillusi 2]

you require an F2-20 GF1 interface and an SC02 cable to connect this to your PC

[Crossbow 295]

I would look for a handheld programmer for that old thing. I have one we rent out to assist our customers. You will need an adapter kit and RS232 to 422 converter to mae MEDOC talk to it. Your SC09 and GX-Developer are useless for this really old PLC.