Omron programming software

[Guest Terry Murphy]

I have a SYSMAC CQM1 , CPU21 processor. I would like to connect, download, document and troubleshoot the machine it controls. I have the VERY expensive programming cable but, no software. Any suggestions? TM

[Rebuke 0]

Your local OMRON rep will be happy to help you out. Not sure of the price of CX where you are but it'll be a lot more than the 'expensive' cable you mentioned, (I assume CIF-02) so be prepared. FYI you might want to look around for an old copy of SYSWIN, which will also program your CQM-21. Check the OMRON website for a rep near you.

[Jay Anthony 118]

Terry Murphey: Please register at MrPLC.com and join the MRPLC.com community Register at MrPLC.com What if I told you you could throw away "that very expensive cable" and build one yourself for the port next door for about ten bucks? Radio Shack in Moline sells the parts. Omron Serial Cables @ MrPLC.com Ever thought of ebay? I just saw two copies of Syswin going for less than $20. If Yair is around I bet you he would point you to a download site.

[BobB 58]

Here you go Syswin

[AFab 0]

Another Site To Try http://www.plcman.co.uk/page6.html